- TRANSPORTATION SECTION
Menu
Air Jet Filter
SCOPE OF AIR JET FILTER
Suitable to separate dust and other particles suspended in air of cleaning department aspirator system before being discharged to the outside with a bottom scraper.
| APPLICATIONS OF BUCKET ELEVATOR |
|---|
| At food industry. |
| Flour and semolina mills. |
| Feed mills. |
| Biscuit and macaroni factories |
| Nut processing plants |
| Brewery factories |
| Other food processing plants |
| At chemical industry |
| Paint factories |
| Plastic factories |
| Detergent factories |
| At wooden industry |
| At non-metallic industries |
| At stone and soil quarries |
| At cement factories |
| For general use |
1
Content
| 1. | Fabricated cylindrical sheet-metal structure with tangential inlet and wide inspection doors. |
| 2. | filtering sleeves supported by metallic circular cages with quick release clamps. |
| 3. | Pneumatic low pressure sleeve cleaning system utilizes compressed air at 0,6 bar. |
| 4. | Distribution group with solenoid valve to control rinsing valves. |
| 5. | Electronic equipment to position rotary manifold and program operation setting (rinsing time, pause, etc). |
| 6. | Flat bottom with scraper. |
Filtration phases in the N1 bag: the dusty air is purified (filtrated) in the outer surface of the hose type filter bag
Final cleaning phase in the N2 bag: dust loaded outer surface of the filter bags is cleaned respectively by blowing air from inside of bags. The accumulated dust is discharged out of the air lock due a scraper.
| 1. | The filter can be used in the pressurized and vacuum systems. The cleaning of hose type filter bags is carried out by air at 0.5 bars, which is free of oil and water. |
| 2. | The consumption of the cleaning air is found by this formula: 30 - 40 NLt (Newton liter) x bag x blow. |
| 3. | The optimal flow geometry of the cleaning air route shows as mentioned below . |
| 4. | The loading capacity of filter for each product |
| 5. | The max cleaning capacity for each filter bag |
| 6. | The highest cleaning ratio of cleaned air |
| 7. | The filter body is combined with cleaning air tank. Therefore, there is no need for an additional air tank The important criterions of filter loads.In addition to the given effective values at right, the loading of filter depends on some other factors such as, chemical |
